TP-Link TD-8816B User Manual page 26

3. PPPoA/PPPoE
Select this option if your ISP requires you to use a PPPoE connection. This option is typically
used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your
PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoE connection.
Please enter the information accordingly.
Service name: Specify a name for the PPPoE/PPPoA connection for recognition.
Username: Enter your username for your PPPoE/PPPoA connection to identify and verify
your account to the ISP.
Password: Enter your password for your PPPoE/PPPoA connection.
Encapsulation: For both PPPoE/PPPoA connection, you need to specify the type of
Multiplexing, either LLC or VC Mux.
Bridge Interface: Activate the option, the Router can also work in Bridge mode.
Connection: For PPPoE/PPPoA connection, you can select Always on or Connect
on-Demand or Connect Manually. Connect on demand is dependent on the traffic. If there
TD-8816B ADSL2+ Modem Router User Guide
Figure 4-9
21