The Back Panel - TP-Link TD-W8951ND User Manual

TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide

2.2 The Back Panel

Figure 2-2
POWER: The Power plug is where you will connect the power adapter.
1, 2, 3, 4 (LAN): Through the port, you can connect the Router to your PC or the other
Ethernet network devices.
RESET: There are two ways to reset the Router's factory defaults.
Method one: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from "Maintenance-SysRestart" of the Router's
Web-based Utility.
LINE: Through the port, you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to 2.4.
Antenna: Used for wireless operation and data transmit.
5