Table of Contents
Advertisement
CONTENTS
Set Date/Time: Touch <Set Date/Time> to change the system time or date. Touch to highlight the
value to change, then use the <L>or <L> icons to increase or decrease the value as desired. Touch
<OK> to return continue and return to the Configuration screen.
LCD Brightness: Touch any section of the horizontal bar to select a new brightness setting. Selecting
low numbers along the bar will result in a darker screen while selecting high numbers makes the
screen appear brighter. Brightness levels range from 1 to 15.
Tone Volume: Touch any section of the horizontal bar to select a new tone volume setting. Selecting
low numbers along the bar will result in lower volume while selecting high numbers makes the
louder. Tone volume settings range from 0 to 10.
Zero Balance: This feature is used to eliminate treadbelt "creep" (slow movement of the treadbelt
while the speed is set to zero.) Select negative values to zero out forward treadbelt creep and pos-
itive values to zero out reverse belt creep.
Note: Belt Movement While at Zero Speed
Inherent "belt creep" is common with Pulse Width Modulation Motor Control. Allow the treadmill suffi-
cient time to "warm up" prior to making any adjustments for belt creep.
Incline Range: Only an incline range of 0-15 should be used with the Gait Trainer.
Measure Units: The Biodex Gait Trainer can be configured to display either U.S. or metric mea-
surements. To change units, touch the displayed units and then touch the desired setting to select.
Histogram X: This setting allows the X axis for the histogram to be units of time, steps or distance.
Change Access ID Code: At the Default Settings screen, users can change the Access Code used to
access the Default Settings screen.
to change the access Id code
1.
At the Configuration Screen, touch <Change Access ID Code>.
2.
Select your New Access ID Code by entering the value using the <L>or <L> arrows or
the key pad displayed.
3.
Press <OK> to save the New Access ID Code and return to the Default Settings screen.
— 10-3 —
GAIT TRAINER UTILITIES
Hide quick links:
Advertisement
Table of Contents
