The Footfalls/Histogram Screen - biodex 950-400 Operation Manual

CONTENTS

the footfalls/hIstoGraM screen

(See Figure 4.4 – 4.5.)
Figures 4.4. and 4.5. Patients can view the Footfalls/Histogram screen with either Footfalls or Histograms
displayed. In the Footfalls screen, the solid foot marks the user's last foot placement while the line is a target
for the next foot placement.
footfalls/histogram screen parameters
Touch <Next> at the Patient Setup Information screen to advance to the Footfalls/Histogram
screen. At this screen, users can view patient progress via either a footfall or histogram display.
Just touch the appropriate icon at the bottom of the left to toggle between display formats. With
either display, the following parameters can be adjusted at any time as follows:
GAIT TRAINING MODE
Toggle by pressing
yellow dot to
display speed as
cycles/sec, MPH,
or meters/sec
Real time (average of last 5
steps) display of step length
Y axis – Step Length can be
scales 0-60 cm, 0-80 cm, 0-100
cm or 0-120 cm.
X axis – can be TIME,
DISTANCE or STEPS
To change the axis label: Before
the gait training has started
simple touch the axis label to
toggle between choices.
— 4-4 —