Sharp MD-MT285E Operation Manual page 33

! To display the playing time of an indi-
vidual track
[On the main unit]
1 Whilst in the stop mode,
A
press the or button
to display the track
number and track name.
2 Press the MENU/ENTER button.
3 Press the or button repeatedly to select
"DISPLAY".
4 Press the MENU/ENTER button.
5 Press the or button
to select the playing time.
6 Press the MENU/ENTER button.
[On the optional FM/AM tuner remote control: AD-
TRC1]
1 Whilst in the stop mode, select a track by press-
ing the or button.
2 Press the DISPLAY/FM MODE button.
A B
Track name
Track number
Playing time
MD-MT285E TINSE0539AWZZ
! Checking the remaining amount of bat-
tery level
The remaining amount of battery level is shown by the
battery indicator ( ) during operation.
B
How to read the battery indicator
When the battery When the battery
level is high level is very low
" When the battery level is very low, the battery indicator
C
will flash. Replace the alkaline battery with a new one.
" When the battery has run out completely, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
" The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
" When the AC adaptor or a optional car adaptor is
used, the battery indicator will not be shown.
" The number of bars shown in the battery indicator may
C
increase or decrease, depending on the operation
being performed. This is normal.
" In the tuner mode, the battery indicator does not light.
03/7/15
MD-MT285E
33
MD_MT285E_4.fm
1
2
3
4
5
6
7
8
9