Table of Contents
Advertisement
Security
Protecting System Information
Using System Information
System Information options allow you to:
Display or enter the notebook serial number, asset tag, and
ownership tag.
Display a battery pack serial number.
Setting System Information Options
1. Open the Setup utility by turning on (not restarting) the
notebook.
2. Press
displayed in the lower left of the screen.
For navigation instructions, press
3. To view general system information, select
Main menu > System Information.
4. To view or enter identification values for system components,
select Main menu > System IDs.
5. To confirm the information or your preferences, press
6. To save your preferences and exit the Setup utility.
a. Press
b. Select Exit Saving Changes.
c. Then follow the instructions on the screen.
Your preferences are set as you exit Setup and are in effect when
the notebook restarts.
2–12
while the "Press <F10> to enter setup" prompt is
F10
(or select Exit from the menu bar).
esc
F1.
Software Guide
F10.
Advertisement
Table of Contents
