Tv Audio Connection; Connecting Tv Audio - HP Home Theater System User Manual

TV Audio Connection

You can connect your TV, monitor, or display audio
directly to your HP Digital Entertainment Center for
two-speaker sound.

Connecting TV Audio

To connect a TV, monitor, or display audio directly:
Connect an RCA stereo cable (White: Left;
■
Red: Right) from the HP Digital Entertainment Center
back panel Audio Out connector to a TV Audio In
connector.
The following diagram shows a basic TV audio installation:
Basic TV audio setup (2.0)
TV
AUDIO IN
AUDIO IN AUDIO 7.1 PRE-OUT VIDEO
SURROUND SURROUND CENTER FRONT
BACK
VIDEO
L L L L
100-240V- 4/A 50/60Hz
R R R SUB R
S-VIDEO
AC IN
WOOFER
COAXIAL
10/ 100/ 1000
OPTICAL
DIGITAL AUDIO HI SPEED USB 2.0 1394 ETHERNET
OUT
If your TV has multiple inputs, you can use your TV as a
switch for audio and video.
Refer to the Start Here booklet that came with the
HP Digital Entertainment Center.
For additional information on connecting the speakers,
refer to the documentation that came with your speakers
and AV receiver.
OUT WIRELESS LAN
REMOVABLE ANTENNA
Y
Pb
TV SOURCE 1 IN
DVI
R L
Pr
AUDIO
COMPONENT VGA
TV SOURCE 2 IN
R AUDIO L
INFRARED TRANSMITTER OUT
DIGITAL VIDEO OUT
802.11 b/g
ACTIVITY
LINK
CABLE/ANT. IN FM ANTENNA IN
Ω
DUAL 75
VIDEO S-VIDEO TUNER COAXIAL
HDTV / SDTV ANT. IN
S-VIDEO ATSC TUNER
2 1
Connecting Audio
39