Remote Control Operation; Installing The Remote Control Batteries - HP Home Theater System User Manual

Remote Control Operation

Use the remote control to open the Media Center
program; view TV, record TV programs, play previously
recorded TV programs, and play music, movies, or video.
See "Using the Remote Control" in the Media Center
Edition 2005 Software Guide for detailed instructions on
using the features of the remote control.
To use the remote control, just point it at the HP Digital
Entertainment Center and press a button. Use the remote
control at a maximum distance of 26 feet (8 meters) from
the remote sensor and at a maximum of 45 degrees
(90 degrees total) from the center of the remote sensor.
The remote control will not operate until the HP Digital
Entertainment Center is powered on and fully booted up.
Media Center must be in full-screen mode (or
have focus) for consistent remote control
operation. Performance may vary.

Installing the Remote Control Batteries

1
Slide the battery cover off the back of the remote
control.
2
Insert the two AA alkaline batteries (provided). Make
sure the battery positive and negative ends are
inserted correctly!
3
Replace the battery cover.
4
Test the remote control by pressing any key.
The indicator light should blink.
Use only alkaline batteries in the remote.
16
HP Digital Entertainment Center
n
n
On /Standby
LED
DVD MENU TV
RADIO MUSIC PICTURESVIDEOS
RECORD
PLAY STOP
REW FWD
PAUSE
REPLAY SKIP
OK
HP Digital Entertainment Center z545
90˚
~26
feet
Indicator
Light
Remote operation