HP DL120 Specifications page 5

QuickSpecs
Standard Features
Storage
Maximum Internal
Storage Type
Interfaces
Graphics
Form Factor
Embedded
Manageability
Optical Drive
Hard Drives
Hot Plug SAS
Non-Hot Plug SATA
Serial
Pointing Device
Keyboard
Graphics
Network RJ-45
USB 2.0
64MB shared supports all display resolutions up to 1600 x 1200 16bpp @ 75Hz
Rack (1U), (1.69 in/4.32 cm), 27.56" deep
HP ProLiant LO100
DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010
Optional 9.5mm DVD-ROM, or DVD-RW Drive
Entry Model
Base Model
(Cold Plug)
Performance Model
(Hot Plug)
8.0TB
8.0TB
1
1
1
1 (rear)
2
7 (2 front, 1 internal, 4 rear)
NOTE: Please see the following URL for additional information
regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-
support.html
HP ProLiant Lights-Out 100, simplifies server setup, control, and lights-
out remote administration of ProLiant 100 Series servers and functions
without additional software. It can be accessed from any location via
LAN or Internet and works hand-in-hand with HP Systems Insight
Manager (SIM), helping customers unlock the value of the ProLiant
platform and deliver the highest possible quality of IT service to the
business. Advanced Licenses are required for Virtual KVM and Virtual
Media feature activation.
Key features of LO100 are:
IPMI 2.0 & SMASH CLP support
ROM Setup Utility
Improvements to virtual media with the addition of USB 2.0 drives
and protocol support for much faster transfer speeds and DVD-
ROM support plus simplified virtual media (floppy and CD with no
FTTP server requirements)
Enhanced browser interface and embedded KVM over IP provides
HP ProLiant DL120 Generation 6
Up to 4 non-hot plug SATA/SAS 3.5" drives
supported. 1x160GB non hot plug SATA 3.5"
drive ships standard
NOTE: SAS requires optional HBA or SA card
Up to 4 non-hot plug SATA/SAS 3.5" drives
supported. None ships standard
NOTE: SAS requires optional HBA or SA
card.
NOTE: SATA Hot Plug available via Hot Plug
Advance Pack for B110i
NOTE: Support for additional SAS/SATA hot
plug drives requires HP Smart Array
Controller.
Up to 4 hot plug SATA/SAS 3.5" drives
supported. None ships standard
(4 x 2TB) 3.5" SAS
(4 x 2TB) 3.5" SATA
Page 5