HP DL120 Specifications page 4

QuickSpecs
Standard Features
Memory
One of the following
depending on Model
Network Controller
Expansion Slots
1
(Standard)
2
(Standard)
1
(Optional)
Storage Controllers
Type
Standard (Entry Model)
Standard (Base Models) 2GB (1x2GB) UDIMM
Standard (Performance
Models)
Maximum Memory
NOTE: Depending on the memory configuration and processor model, the memory speed may run
at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator.
Embedded NC107i Gigabit Server Adapter
Technology Bus
Width***
PCIe G2 X16
PCIe G1 X4
PCI-X 64-bit
(133MHz,
3.3Volt)
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus
assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus)
*** Indicates the number of physical electrical lanes running to a PCI-e connector.
Entry and Base Model
Performance Model
DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010
DDR3 1066/1333MHz Unbuffered (UDIMM) and Registered (RDIMM)
2GB (1x2GB) UDIMM
4GB (2x2GB) RDIMM
Supports up to 16GB DDR3 1066/1333 Unbuffered ECC DIMM or 16GB
DDR3 800/1066/1333 Registered DIMM.
Supports up to 4 UDIMMs or 6 dual rank RDIMMs
Connector Bus
Width Number*
x16 0
x8 0
N/A 0
HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)
NOTE: Transfer rate: 3Gb/s SATA
NOTE: SATA Hot Plug available via Hot Plug Advance Pack for B110i
NOTE: Hot Plug SAS and SATA controllers available via PCI card
option.
NOTE: Smart Array SAS Controller requires the HP CA ASSY 384SATA
to MINI-SAS Kit (P/N 487734-B21) must be ordered.
HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)
HP ProLiant DL120 Generation 6
Device No.** Form
Factor
1 Full length,
full height
slot
28 Half height,
low profile
slot
1 Full length,
full height
slot
Notes
Page 4