HP DL120 Specifications page 31

QuickSpecs
Technical Specifications
Power Supply
Acoustic Noise
Emissions
Classification (EMC)
Input voltage
specifications
Input Specifications
BTU Rating
Ambient temperature
range
Relative humidity
(non-condensing)
Dielectric voltage
withstand
Maximum Wet Bulb
Temperature
DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
LpAm
Operating
LWAd
LpAm
FCC Rating
Normative Standards
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
statements.
Rated input voltage
Rated input line
Frequency range
Rated input power
Rated input current
Steady state power
1710 BTU/hr
Operating
Non-operating
Operating
Non-operating
Input to output
Input to ground
104° F (40° C)
HP ProLiant DL120 Generation 6
6.30 B
44.1 dBA
6.34 B
44.4 dBA
Class A
CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
100 VAC to 240 VAC
90 VAC to 264VAC
47 to 63 Hz
@ 115V input, Rated input power = 500W
(assume output wattage=400W
@ 230V input, Rated input power = 500W
(assume output wattage=400W)
6 A, 3 A (110 V, 220 V)
400W (rated)
41° to 122° F (5° to 50° C)
-40° to 167° F (-40° to 75° C)
5% to 95%
5% to 95%
2150 VDC minimum, withstand 1 min
2150 VDC minimum, withstand 1 min
Page 31