HP DL120 Specifications page 32

QuickSpecs
Technical Specifications
Integrated Serial ATA
Controller
Embedded HP NC107i
PCIe Gigabit Server
Adapter
Simultaneous drive
transfer channels
Transfer rate
synchronous
(maximum theoretical)
Data transfer method
Drive support
Data transfer modes
Protocol
Feature
RAID levels supported 0, 1
RAID Features
RAID OS Support
Network Interface
Compatibility
Data Transfer Method Four lane (x4), 100MHz PCI Express Reference Clock
Controller
Network Transfer Rate 10Base-T (Half-Duplex)
Connector
Cable Support
DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010
4 channels
150 MB/s per channel; 300 MB/s in RAID 0 pair
Intel® 82801IR Integrated Serial ATA Host Controller (non-RAID mode)
Intel® 82801IR Integrated Serial ATA Host Controller (RAID Mode)
Serial ATA
Legacy Mode
Combined Mode
Serial ATA
NCQ (Native Command Queuing); AHCI (Advanced Host Controller
Interface)
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility
Installation scripting support
NOTE: This controller does not support Hot Plug functions or LED
functions.
Microsoft Windows Server 2003
NOTE: In order to implement integrated SATA RAID with Smart Start
7.90 on Windows 2000/2003, the use of a floppy drive is necessary.
Linux (Red Hat, SuSE, UnitedLinux)
10Base-T/
100Base-TX/
1000Base-TX
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
BCM5723
10Base-T (Full-Duplex)
100Base-TX (Half-
Duplex)
100Base-TX (Full-
Duplex)
1000Base-TX (Half and
Full-Duplex)
RJ-45 connector
10Base-T
10/100/1000Base-TX
HP ProLiant DL120 Generation 6
10 Mb/s
20 Mb/s
100 Mb/s
200 Mb/s
2000Mb/s
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
Category 5 UTP; up to 328 ft (100 m)
Page 32