Table of Contents
Advertisement
7.3 Setting the END
1.
Activate the appliance and set a heat-
ing function and temperature.
2.
Touch
display shows
display.
3.
Touch
set the minutes and then the hours)
and
4.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the
display. The appliance deactivates.
5.
Touch a sensor field to stop the
acoustic signal.
6.
Deactivate the appliance.
7.4 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a count-
down (maximum 2 h 30 min). This func-
tion has no effect on the operation of the
appliance. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
There are 9 automatic pro-
grammes and recipes. You can
find the recipes for the automatic
programmes in the "Recipe
book".
8.1 Automatic programmes
Setting an automatic programme:
1.
Activate the appliance.
2.
Touch
and number of the automatic pro-
gramme.
3.
Touch
matic recipes.
4.
Touch
the appliance automatically starts to
work.
again and again until the
.
flashes in the
or
to set END (first you
to confirm.
. The display shows symbol
or
to choose the auto-
or wait five seconds until
1.
Touch
.
and "00" flash in the
display.
2.
Use
or
to set the MINUTE
MINDER. First you set the seconds
and then minutes and hours.
3.
Touch
and
to reset the set time.
4.
Touch
or the MINUTE MINDER
starts automatically after five sec-
onds.
5.
When set time ends, an acoustic sig-
nal sounds for two minutes. "00:00"
and
flash in the display.
6.
Touch a sensor field to stop the
acoustic signal.
7.5 Setting the Time delay
function
DURATION
and END
at the same time, if the appliance is to be
switched on and off automatically later. In
case first set the DURATION
END
function (refer to "Setting the DU-
RATION" and "Setting the END" ).
5.
When set time ends, an acoustic sig-
nal operates for two minutes. Symbol
flashes.
The appliance deactivates.
6.
Touch any sensor field to stop an
acoustic signal.
8.2 Automatic programmes with
weight input
If you set the weight of the meat, the ap-
pliance calculates the roasting time.
1.
Activate the appliance.
2.
Touch
.
3.
Touch
or
programme (refer to "Recipe book" ).
The display shows: cooking time, du-
ration symbol
unit of measurement (g).
ENGLISH
13
at the same time
can be used
and then
to set the weight
, a default weight, a
Advertisement
Table of Contents
