Table of Contents
Advertisement
12 www.electrolux.com
ator with the sponge. If necessary, clean
the steam generator with some vinegar.
Let the appliance dry fully with the door
open.
6.6 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
7. CLOCK FUNCTIONS
SYM-
BOL
7.1 Count Up Timer
The Count Up Timer starts to count when
the appliance starts to heat.
Reset the Count Up Timer: Touch
and
shows "00:00" and the Count Up Timer
starts to count up again.
The Count Up Timer is not activa-
ted if Duration and End are set.
7.2 Setting the DURATION
1.
Activate the appliance and set a heat-
ing function and temperature.
2.
Touch
display shows
flashes in the display.
FUNCTION
DESCRIPTION
TIME OF DAY To show the time of day. To change the time of day,
refer to 'Setting the time of day'.
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates. You can use
Duration and End at the same time (Time delay) if you
want the appliance to activate and deactivate automati-
cally later.
at the same time until the display
again and again until the
.
minutes or you must use the clock
functions (Duration, End, Time delay).
– When the appliance is off, you can
use the heat to keep food warm. The
Clock / Residual heat display shows
the remaining temperature, and the
bars show the temperature as it de-
creases.
• Cooking with the lamp off - Touch
to deactivate the lamp during cook-
ing.
• Deactivating the display - If necessa-
ry, you can fully deactivate the appli-
ance. Touch
and
time until the display goes out. This
step also activates the appliance.
3.
Touch
or
for DURATION.
4.
Touch
to confirm.
5.
Touch
or
DURATION.
If you touch
hours for DURATION, the appli-
ance goes to the END function
setting.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the
display. The appliance deactivates.
Touch a sensor field to stop the
acoustic signal.
7.
Deactivate the appliance.
at the same
to set the minutes
to set the hours for
while you set the
Advertisement
Table of Contents
