Preset Tuning; Rds - Teac R-X1 Owner's Manual

Preset Tuning

You can store 30 FM and 10 AM stations.
1
Tune in a station you want to listen
to (see steps 1 to 3 of page 14).
2
Press the MEMORY button.
The PRESET indicator and "SET" blinks
on the display.
3 Within 5 seconds, select a preset
channel to store the station using the
numeric buttons.
To select channel No.16 for example,
press "1", and within 5 seconds press
"6".
To select channel No.1 through 9, press
"0" and then the number. As an
example, to select number 3, press "0"
and "3".
"P-" and the preset number will blink on
the display.
16
4 Within 5 seconds, press the MEMORY
button.
1
To store more stations, repeat steps
4 .
How to select preset stations
1
Select FM or AM using the FUNCTION
button.
to
2 Press the numeric buttons.

RDS

The Radio Data System (RDS) is a
broadcasting service which allows stations
to send additional information along with
the regular radio programme signal.
RDS works on the FM waveband in
Europe only.
1 Tune in an FM RDS station (see steps
1 to 3 of page 14).
2 Press the RDS MODE button.
Each time the RDS MODE button is
pressed, the RDS mode is changed as
follows:
PS (Programme Service name)
When you select PS, PS or a station's
name will be displayed. If there is no PS
data, "NO PS" will be displayed.
PTY (Programme Type)
When you select PTY, the programme
type will be displayed. If there is no PTY
data, "NO PTY" will be displayed.
RT (Radio Text)
When you select RT, the news of
stations composed of up to 64 symbols
will be displayed. If there is no RT data,
"NO RT" will be displayed.
17