Display; Memory Backup; Setting The Clock - Teac R-X1 Owner's Manual

Display

D
E
F
G
A B C
A Lights when RDS function is active
(European models only).
B Lights when an FM stereo broadcast is
tuned.
C Blinks when the MEMORY button is
pressed.
D Digital clock
E Lights when the timer is on.
F Lights when the sleep timer is active.
G Shows frequency, volume, etc.
12

Memory Backup

If the unit is disconnected from the power
supply for more than 40 minutes, the
clock and the timer setting will be erased.
If the unit is disconnected from the power
supply for more than 24 hours, preset
stations will be erased.

Setting the Clock

MULTI JOG
CLOCK ADJ
1 Press and hold the CLOCK ADJUST
button for more than 3 seconds and
release it when "24 HOUR" or "12
HOUR" appears on the display.
< If you leave the unit idle for 20 seconds,
the time setting mode will be cancelled.
2 If you want to change the hour
mode, turn the MULTI JOG knob to
select 24 or 12 hour mode.
The default setting is 24-hour.
3
Press the CLOCK ADJUST button.
4 Turn the MULTI JOG knob to set the
current hour.
5 Press the CLOCK ADJUST button.
The "minute" value blinks.
6
Turn the MULTI JOG knob to set the
current minute.
7 Press the CLOCK ADJUST button.
"CLOCK OK" briefly appears on the
display, and the clock starts from 00
second.
13