Synology DS-101j User Manual page 27

Condition 3, Home Network without IP Sharing:
1. Connect the AC power adapter to the DS-101j Disk station, and plug the AC
power cord into a power outlet.
2. Without IP sharing, you need to install a router to set up the network first.
3. Plug the RJ-45 LAN cable into the DS-101j Disk Station, and connect the other
side of the LAN cable to your switch/hub/router. (Please refer to the schematic as
the above.)
4. Press the Power button to start DS-101j Disk Station.
Condition 4, Direct Connection:
1. Connect the AC power adapter to the DS-101j Disk station, and plug the AC
power cord into a power outlet.
2. Plug the RJ-45 LAN cable into the DS-101j Disk Station, and connect the other
side of the LAN cable to your PC/notebook.
3. Press the Power button to start DS-101j Disk Station.
27
Synology DS-101j