Transferring Images To A Computer Without Hp Image Zone Software; Using A Memory Card Reader - HP Photosmart R507 User Manual

•
If your printer has a memory card slot in it, and if you are
using a memory card in your camera, you can simply
remove the memory card from the camera and insert it in
the memory card slot in the printer.
The process for transferring images and video clips from the
camera to your computer will be different, since normally
the HP Image Zone software handles this task. See the
following section for details.
Transferring Images to a Computer
without HP Image Zone Software
NOTE
If you have a Windows Me, 2000, or XP system, you
do not need to read this section. Simply connect the
camera to your computer with the USB cable, and the
operating system will launch a program to help you
transfer images.
If you do not, or cannot, install HP Image Zone on your
computer, there are two ways to transfer images from your
camera to the computer: using a memory card reader, or
configuring the camera as a disk drive.

Using a Memory Card Reader

If you are using a memory card in your camera, you can
simply remove it from the camera and put it in a memory card
reader (purchased separately). The memory card reader acts
just like a floppy disk drive or CD-ROM drive. In addition,
some computers and HP Photosmart printers have memory
card slots built into them, and you can use these memory card
slots as you would use a regular memory card reader to save
images to the computer.
114 HP Photosmart R507/R607 User's Manual