Using Panorama Mode - HP Photosmart R507 User Manual

Using Panorama Mode

NOTE
If the HP Image Zone software is not installed on your
computer, see
HP Image Zone Software
Panorama mode allows you to take a sequence of 2–5 pictures
that can be "stitched" together in order to capture a scene too
wide to fit into a single picture. In
picture as the first in the panoramic sequence, and each
subsequent picture you take is added to the panorama until
you end the sequence by pressing the
until you have taken the fifth picture in the sequence. You can
then view a low-resolution image of your panorama with the
Preview Panorama Menu
page 84), or you can transfer the images in the panoramic
sequence to your computer for stitching together and then
viewing or printing.
Your camera came with the ArcSoft® Panorama Maker™
software that automatically stitches the images in the
panoramic sequence together on your computer during image
transfer. The Panorama Maker software was automatically
installed on your computer during the HP Image Zone software
installation process (see
To transfer the panoramic sequence of images from your
camera to your computer so that the ArcSoft Panorama Maker
software can stitch the images together, see
Images to a Computer
48
Using Your Camera without Installing the
on page 113.
option in the
Installing the Software
on page 97.
HP Photosmart R507/R607 User's Manual
Panorama mode, you take a
Menu/OK
Playback Menu
Transferring
button, or
(see
on page 19).