Cannot View 3D Images; Cannot View 3D Images S - Epson EB-W16 User Manual

Problem Solving
Check
Is the correct port selected?
Is the power for the computer or video source turned on?
Are the image signals being output to the projector?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)

Cannot view 3D images

Check
Is the Configuration menu set correctly?
Is the input signal a 3D signal?
Are you wearing the 3D Glasses correctly?
Are the 3D Glasses turned on?
Are you viewing within the 3D image viewing area?
Are there any devices that cause radio wave interference in the
vicinity?
Change the image by pressing the [Source Search] button on the projector's control panel or remote control.
s "Automatically Detect Input Signals and Change the Projected Image (Source Search)"
Turn the power on for the equipment.
If the image signals are only being output to the computer's LCD monitor or to the accessory monitor, you need to
change the output to an external destination as well as the computer's own monitor. For some computer models, when
the image signals are output externally, they no longer appear on the LCD monitor or accessory monitor.
If the connection is made while the power of the projector or computer is already turned on, the Fn key (Function key)
that changes the computer's image signal to external output may not work. Turn the power for the computer and the
projector off and then back on again.
s "From Installation to Projection" p.28
s Computer's documentation
• Set 3D Display to On.
• Set 3D Format to Auto or the same format as the 3D signal from the connected device.
s Signal - 3D Setup p.75
Check that the connected playback device and the content being played support 3D signals.
To view 3D images with this projector, you need active shutter 3D glasses. Use the optional active 3D Glasses (ELPGS03).
s "Optional Accessories" p.106
Turn on the 3D Glasses. Also, when you turn on the power for the first time, you need to perform pairing.
s "Registering the 3D Glasses to the projector (pairing)"
The range for viewing 3D images is up to 10 meters from the projector. Make sure you view within the viewing range.
s "Viewing area for 3D images" p.50
When using other devices at the same time with the frequency band (2.4 GHz) such as Bluetooth communication
devices, wireless LAN (IEEE802.11b/g), or microwave ovens, radio wave interference may occur, or the image may be
interrupted. Do not use the projector near these devices.
Remedy
p.29
Remedy
p.49
90