Problem Solving
Check
Is the color adjustment set correctly?
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Images appear dark
Check
Is the image brightness set correctly?
g
Is the contrast
adjusted correctly?
Is it time to replace the lamp?
Are you using the projector at a high altitude or in a location subject
to high temperatures?
Problems when Projection Starts
The projector does not turn on
Check
Did you press the [t] button?
Are the indicators switched off?
Adjust the Color Adjustment setting from the Configuration menu.
s Image - Color Adjustment
p.74
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint
p.74
Adjust the Brightness or Power Consumption settings from the Configuration menu.
s Image - Brightness
p.74
s Settings - Power Consumption
p.77
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast
p.74
When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s "Replacing the Lamp"
p.100
The screen may become dark when using at high altitude or in a location subject to high temperatures. Although you
cannot make Power Consumption settings at this time, you can continue to use the projector.
Press the [t] button to turn the power on.
The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
s "From Installation to Projection"
p.28
Check that your electrical outlet or power source is functioning correctly.
Remedy
Remedy
Remedy
94