Sending Data Via Bluetooth - Sanyo SCP-2500 Operating Manual

Hide thumbs Also See for SCP-2500:

Table of Contents

Select MENU/OK > Tools > Bluetooth > <Add New> > Search. (Your phone will display a

list of discovered in-range Bluetooth devices.)

Select the device you wish to pair with and press MENU/OK.

Enter the PIN code and press MENU/OK. (When the owner of the other device enters the

same code, the pairing is complete.)

Waiting for Request

If you are going to be using a Dial-Up Network (DUN) profile to pair with a PC or PDA, you will

need to allow the other device to initiate pairing with your phone.

To allow your phone to be paired with another Bluetooth device:

Select MENU/OK > Tools > Bluetooth > <Add New> > Wait for Request.

Follow the onscreen prompts to enter your PIN code and press MENU/OK.

Sending Data via Bluetooth

You can send data saved on the handset using Bluetooth technology.

Sending an Item

To send an item:

Select MENU/OK > Tools > Bluetooth.

Select the device from the trusted devices list , and press Options(right softkey)> Send

Item.

Select an item (Business Card, Contacts, or Calendar Event) and press MENU/OK.

Follow the onscreen instructions to select an item to send.

Make sure the other device is ready to receive data, and then press Send(left softkey).

Table of Contents