Switching The Display's Brightness; Stopping Digital Outputs; Using The Sleep Timer; Sleep Timer - Marantz NA8005 Owner's Manual

Contents Connections

Switching the display's brightness

The display brightness can be adjusted between four levels. Switching the
display off reduces a source of noise that affects sound quality, enabling
higher sound quality playback.
1
Press DIMMER.
0 When the display is turned off, the DISPLAY OFF indicator lights.
0 If you operate the buttons when the display brightness is set to "Off", the display
temporarily lights at 100% brightness level.

Stopping digital outputs

Stopping digital audio output reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
1
Press DIG. OUT.
The digital audio output is switched on and off each time the button
is pressed.
When digital output is turned off, the "DIG. OUT OFF" indicator
0
lights up on the display.
Front panel Rear panel
Playback

Using the sleep timer

Use this function to automatically switch the power to the standby mode
after a specific amount of time (minutes).
1
o Canceling the sleep timer
o To check the time remaining until the sleep
Remote control
33
unit
Settings Tips
Press SLEEP during playback and select the setting
time.
The sleep timer can be set to up to 90 minutes, in steps of 10
0
minutes.
After about 3 seconds, the setting is entered and the display
0
returns to as it was before.
Either press SLEEP to select "Sleep 1 OFF" or press POWER X.
timer is activated
Press SLEEP.
Index
Appendix