Care & Maintenance - VTech InnoTab 2 User Manual

Care & Maintenance
1. Keep InnoTab
of heat.
2. Remove the batteries when not using it for an extended period of
time.
3. Avoid dropping it. NEVER try to dismantle it.
4. Always keep your InnoTab
5. Please regularly examine the AC adaptor (sold separately), checking
for damage to the cord, plug, adaptor or other parts. Do not use the
adaptor if there is any damage to it.
Using the InnoTab
• Use only enough pressure to operate the game. Too much pressure
may damage the touch screen.
• Do not use the stylus if it is broken.
• Do not use any other type of stylus on the touch screen other than the
InnoTab 2 stylus.
®
• Put the stylus back in the stylus holder when not in use.
Cleaning the InnoTab
• Slightly dampen a soft, lint-free cloth with a little water and wipe the
screen to loosen dirt.
• Using a clean and dry cloth, wipe the screen dry. Repeat these two steps
as needed.
Cleaning the InnoTab
• Keep your InnoTab
use solvents or abrasives.
Backup battery replacement
• Make sure the tablet is turned off.
• Locate the battery cover on the back of the tablet, under the stand. Locate
the backup battery cover on the back of the tablet, then open it with a
screwdriver as shown in image 8.
2 out of direct sunlight and away from direct sources
®
2 away from water.
®
2 touch screen and stylus:
®
2 touch screen
®
2 cabinet
®
2 clean by wiping it with a slightly damp cloth. Never
®
23