Foxconn 661FX7MJ Series User Manual page 47

vVideo Off Method
This option is used to define the video off method. "Blank Screen" mode
means that after the computer enters power saving mode, only the monitor
will close, however, the vertical and horizontal scanning movement of the screen
continues. When you select the "V/H SYNC + Blank" mode the vertical and horizontal
scanning movement of screen stops when the computer enters power
saving mode. "DPMS Supported" mode is a new screen power management
system, and it needs to be supported by the monitor you're using.
vSwitch Function
This option is used to enable or disable switch function to wake up.
vMODEM Use IRQ
This option is used to set the IRQ in which the modem can use. The system
will automatically wake up when the modem receives an incoming call.
vHot Key Function As
The option is used to define the hot key function.
vHDD Off After
This option is used to define the continuous HDD idle time before the HDD
enters power saving mode.
vPower Button Override
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply.
When "Instant Off" is selected, press the power switch to immediately turn off power.
W hen "Delay 4 Sec" is selected, press and hold the power button for four
seconds to turn off power.
vPower State Resume Control
This option is used to control power resume state.
vPM Wake Up Events
Press enter to set the items of PM wake up Events.
40
Chapter 3 BIOS Description