Traffic Information; Tuner Setup - Kenwood DNN9350BT Instruction Manual

Return to the Top page
Radio

Traffic Information

You can listen and watch the traffic
information automatically when a traffic
bulletin starts.
However, this feature requires a Radio
Broadcast Data System that includes the TI
information.
1
Touch [ ] in the control screen.
The multi function menu appears.
2
Touch [TI] in the multi function menu.
Traffic information mode is set.
Ñ
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
92

Tuner Setup

You can set tuner related parameters.
This function is available for models with
region code 2 or 3.
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TUNER SETUP] in the list.
TUNER SETUP screen appears.
5
Set each item as follows.