Kenwood DNN9350BT Instruction Manual page 28

NOTE
• You must have a connection with the internet
using Wi-Fi.
• The address of the meeting point is effective only
2 hours after adding the address. After that you
can not enter it.
• Come Here function can be used for one person
(one meeting point) at a time.
Return to the Top page
Tracking function
When you upload the location of you car to
the Route Collector site, you can check it in
case your car is stolen.
Precaution
• Tracking function is a handy function to be used
for the primary purpose of tracking the location
of your vehicle. This function can also be used
for secondary purposes, at your sole option and
responsibility. In any event, we cannot accept any
responsibility for any results of your use of the
function, for whatever purpose.
Should you select to use this option, please
activate the function through the procedures set
forth in the left column.
1
Log in to Route Collector site by
the owner account.
http://www.route-collector.com/
2
Set to ON the Tracking function in
the Route Collector site.
You can check the location of your car in
the Route Collector site.
NOTE
• You must have a connection with the internet
using Wi-Fi.
• You can set this function and check the location
of you car only when you log in by the owner
account.
• For the operation of the Route Collector site refer
to the instruction in its website.
Basic Operations
27