Kenwood DNN9350BT Instruction Manual page 12

Number Name
s (Reset)
1
S, R (Vol)
2
Remote
3
Sensor
NAV
4
(DNN9350BT/
DNN9350BTM)
APPS
(DNR8035BT/
DNR8035BTM)
MENU
5
HOME
6
6 (Back)
7
G (Eject)
8
Disc insert
9
slot
SD card slot
10
(DNN9350BT/
DNN9350BTM)
* The function of the [NAV]/ [APPS] button can be changed to camera view function. See
interface (P.111).
• If the unit or the connected unit fails to operate properly, the unit
returns to initial settings when this button is pressed (P.137).
• If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (P.113).
Adjusts volume.
Receives the remote control signal.
• Displays the navigation screen.
• Pressing for 1 second turns the screen off.*
• Displays the APPS screen .
• Pressing for 1 second turns the screen off.*
• Displays the option menu screen.
• Pressing for 1 second switches AV out sources.
• Displays the Home screen (P.18).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Return to the previously viewed screen.
• Pressing for 1 second displays the Hands Free screen (P.102).
• Ejects the disc.
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
A slot to insert a disc media.
An SD card slot for upgrading the map. For how to upgrade the map, refer
to the instruction manual of the navigation system.
Return to the Top page
Basic Operations
Motion
User
11