Replacing The Top Metal Shield - Lenovo Beacon Hardware Maintenance Manual

Replacing the top metal shield

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from
scratches or other damage.
To replace the top metal shield
Step 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"and
"Rear view" for help with locating the various connectors.
Step 4. Remove the two screws that secure the metal shield as shown..
Step 5. Remove the top metal shield from the machine.
24 lenovo Beacon Hardware Maintenance Manual