Configure Trunk - D-Link DES-3225G User Manual

24-port NWay Ethernet Switch User's Guide
VLAN Name, and Tag/Untag, Egress (membership) status
for all ports.

Configure Trunk

Ports on the switch can be grouped together in a single
logical port called a trunk. This is discussed in detail in
the Port Trunking section of the Switch Management
Concepts chapter of this manual.
To setup a trunk group, choose Configure Trunk in the
Configuration menu. The following screen appears:
Figure 6-33. Configure Trunk screen
The fields you can set are:
♦ Master There are three listings representing the master
port for each of the three trunk groups available on the
switch. The master port for each group is preset and
cannot be changed.
104 Using the Console Interface