D-Link DES-3225G User Manual page 107

The above window is used to specify an agent to interface
between IGMP and VLAN. The agents are assigned to a
VLAN and allow IGMP query and report packets to be
present on the given VLAN. Only 12 agents can exist on the
switch at any one time.
Items in the above window are described below:
♦ Action Adds/Removes an entry (agent) from the table.
♦ VID
The VLAN number that you wish to create an
agent for.
♦ Apply Adds the agent to the table.
Go back to the Configure 802.1Q IGMP window and choose
Configure IGMP Control Table (shown below) in order to
activate/deactivate the agents and configure settings for
them.
Using the Console Interface
24-port NWay Ethernet Switch User's Guide
93