D-Link DES-3225G User Manual page 72

24-port NWay Ethernet Switch User's Guide
the settings will be immediately applied to the switching
software in RAM, and will immediately take effect. Some
settings, though, require you to restart the switch before
they will take effect. Restarting the switch will erase all
settings in RAM and reload them from the NV-RAM. Thus,
it is necessary to save all settings to the NV-RAM before
restarting the switch.
In order to retain any modifications made in the current
session by saving them into the NV-RAM, it is necessary to
choose Save Changes from the main menu. The following
screen will appear to indicate your new settings have been
processed:
Figure 6-3. Save Changes screen
After the settings have been saved to NV-RAM, they will
become the default settings for the switch, and they will be
used by the switch every time it is powered on, reset or
rebooted. The only exception to this is a factory reset,
which will clear all settings and restore them to their
initial values listed in the Appendix, which were present
when the switch was purchased.
58 Using the Console Interface