Monitor - D-Link DES-3225G User Manual

The default serial port settings are:
Baud Rate=9600
Data Bits=8
Flow Control=X on/X off
Parity=None
Stop Bits=1
The information is described as follows:
♦ Port Settings The options for the current console
port setting are Console or SLIP.
♦ Console Time Out
minutes, 45 minutes, or 60 minutes for the desired
refresh setting.
♦ Baud Rate Determines the serial port bit rate that
will be used the next time the Switch is restarted.
Applies only when the serial port is being used for
out-of-band (SLIP) management; it does not apply
when the port is used for the console port. Available
speeds are 2400, 9600, 19,200 and 38,400 bits per
second. The default setting in this Switch version is
9600.

Monitor

This third category includes: Switch Overview, Port
Statistics (Traffic,
Utilization), Browse Address Table , Browse IGMP Status ,
and Switch History.
166
24-port NWay Ethernet Switch User's Guide
Choose Never, 15 minutes, 30
Errors, Packet Analysis,
Web-Based Network Management
and