D-Link DES-3225G User Manual page 126

24-port NWay Ethernet Switch User's Guide
Figure 6-39. SNMP Manager Configuration screen
The following SNMP
Configuration parameters can be set:
♦ SNMP Community String The community string that
will be included on SNMP packets sent to and from
the switch. Any station not privy to this community
will not receive the packet.
♦ Access
Right Allows each
separately set to either Read Only, meaning that the
community member can only view switch settings or
Read/Write, which allows the member to change
settings in the switch.
♦ Status
Determines whether this community name
entry is Valid or Invalid. An entry can be disabled by
changing its status to Invalid.
♦ IP
Address The IP
management station to receive traps.
112
Manager and Trap
community
address of the
Using the Console Interface
Manager
to be
network