Separate Arm/Disarm/Panic
A remote configured in this way will operate like many factory keyless entry
remotes. This configuration makes it possible to arm the system with one
transmitter button, disarm it with another, and activate Panic Mode with
a third.
Arm
Panic
Function 2
Silent Mode
™
, Remote Valet
2. In the diagram above, function 2 is assigned to transmitter Button IV. Silent
Mode
™
and Remote Valet work by pressing Button IV for less than one second.
Pressing Button IV for 1.5 will activate the trunk release function.
Functions 3-6
These functions can be assigned to combinations of transmitter buttons as
needed. The functions are provided to control any convenience or expansion
options you wish to add to the system.
© 1997 Directed Electronics, Inc.
®
, and trunk release are all controlled by function
LED
Disarm
Function II
3