Transmitter Channels; Standard Configuration - Directed Electronics 381 Series Owner's Manual

Transmitter Channels

The receiver uses a computer-based Learn Routine
buttons. This makes it possible to assign any button on the remote to any
receiver function. Two of the possible transmitter configurations are illustrated
below.

Standard Configuration

The standard configuration is how the transmitters come programmed initially.
If you would like a custom configuration, see your dealer.
Button V
Button I
Button III
Button VI
Arm/Disarm/Panic
The arm/disarm/panic functions are usually controlled by Button I.
Function 2
The Silent Mode ™ , Remote Valet
by Button II. (Silent Mode and Remote Valet work by pressing Button II for less
than one second.Trunk release requires you to press Button II for 1.5 seconds.)
Functions 3-6
These functions are assigned to transmitter buttons as shown in the diagram.
They are provided to control any convenience or expansion options you wish
to add to the system.
2
™ to learn the transmitter
® , Trunk release functions are usually controlled
© 1997 Directed Electronics, Inc.
LED
Button II
Button IV