Osd Menu - HP L5006tm User Manual

Operating the Monitor
Icon OSD Control Description
4–6
Phase
Clock
OSD H-Position
OSD V-Position
Color Balance
Auto-Adjustment
Recall Defaults

OSD Menu

Increases or decreases the snow noise or
the image after auto-adjustment is made.
The dot clock is fine-adjusted after auto
adjust.
Moves the OSD position horizontally on
the screen. When the
pressed, the OSD menu will move to the
right side of the screen. Likewise, when the
button is pressed, the OSD control
menu will move to the left side.
Moves the OSD position vertically on the
screen. When the
the OSD menu will move to the top side of
the screen. Likewise, when the
is pressed, the OSD control menu will
move to the lower side.
Press or
5500, 7500 or USER. Only when
selecting USER can you make adjustments
to the R/G/B (red/green/blue) content.
Press Enter to restore the factory default
setting.
Press Auto to enable this function. The
Auto-Adjustment will automatically adjust
V-Position, H-Position, Clock and
Clock-Phase.
Returns the monitor to its default settings.
button is
button is pressed,
to select 9300, 6500,
button
User Guide