Connecting The Monitor - HP L5006tm User Manual

Setting Up the Monitor

Connecting the Monitor

1. Place the monitor in a convenient, well-ventilated location
near the computer.
Å
WARNING: To reduce the risk of electric shock or damage to your
equipment:
■
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
■
Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
■
Disconnect power from the monitor by unplugging the power
cord from the electrical outlet.
■
Do not place anything on power cords or cables. Arrange them
so that no one may accidentally step on or trip over them. Do not
pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
2. Connect one end of the power cable 1 to the AC power
connector on the back of the monitor, and the other end to an
electrical wall outlet.
3. Connect one end of the touchscreen serial cable (RS232) or
USB cable 2, but not both, to the rear connector of the
computer, and the other end to the connector on the monitor.
Tighten the two thumb screws on the serial cable to ensure
proper gounding. The USB cable does not have thumb
screws.
4. Connect one end of the video cable 3 to the rear side of the
computer and the other to the VGA connector on the monitor.
3–2 User Guide