Aft Fill-In Seating; Bucket Seats - Four winns FREEDOM Owner's Manual

C. Aft Fill-In Seating
For certain boats having a U-shaped seating and C-
shaped seating configurations, optional aft fill-in cush-
ions may be available. You can turn your stern into a
sundeck or berthing space. These aft fill-in cushions
can be easily removed or installed in a matter of min-
utes. See Figure N4. Please see your Four Winns
dealer for details.
Figure N4: Aft Fill-In Cushions
D. Bucket Seats
Adjustable bucket seat(s) are available on most of the
seating configurations for Freedom™ and Horizon™
models. See Figure N5.
Flip-Up Bolster
Figure N5: Bucket Seat with Flip-Up Bolster
To adjust, lift up on the seat adjustment lever under the
seat. Slide the seat forward or aft to the desired posi-
tion. The seat will adjust approximately six (6) inches.
See Figure N6.
Freedom™/Horizon™ Owner's Manual
Figure N6: Bucket Seat Slider
The driver's side bucket seat and the port side bucket
seat (if applicable) can swivel and face toward the stern
of the boat. When pulling a water skier, this permits
the spotter to be in the proper position to observe. De-
pending upon which model you have, the bucket seat(s)
may be limited in the amount and direction of swivel
possible.
The bucket seat generally comes standard with flip-up
bolster. By simply flipping up the bolster the driver is
able to sit higher in the seat. This is designed to give
the driver greater flexibility, increased visibility, and riding
comfort. See Figure N5.
NOTICE
The bucket seats may or may not rotate com-
o
pletely 180 . The amount and direction of
swivel available depends on the model you
have.
NOTICE
When rotating the bucket seat, damage to seat,
steering wheel (if applicable), and/or coaming
pad may result if attempting to rotate in the
wrong direction or over-rotating. DO NOT USE
FORCE to rotate the chair.
To rotate the bucket seat to face the aft position:
1. Tilt the steering wheel (if applicable) as far forward
as possible.
2. Slide the seat completely forward or rearward (as
needed to clear coaming/side pad or seat cushion)
by using the lever located underneath the seat. See
Figure N6.
3. Locate the lever on the right side of the bucket slider
mechanism and lift upward to release the pin from
the pedestal. This will allow you to rotate the seat.
See Figure N7.
Lift adjustment lever up
to move forward and back.
Section N
Page 2