Installation; Getting Started; Remove Existing Installations - D-Link DWA-552 User Manual

Section  - Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager
before installing your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software
is uninstalled.
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters
• Disable any built-in wireless adapters
• Verify the settings such as the SSID and security settings of the network(s) you want to connect to
If you've installed a different manufacture's adapter or a different model D-Link adapter, make sure the software is uninstalled before
installing the new software. Some utilities may cause a conflict with the new software. If you plan to use multiple adapters at different
times, make sure the utilities are not set to load when your computer boots up. Windows
utility for all adapters.
To remove any old software:
Windows XP users: Click Start > Control Panel > Add or Remove Programs.
®
Windows 000 users: Click Start > Settings > Control Panel > Add or Remove Programs.
®
D-Link DWA-55 User Manual

Installation

Getting Started

Remove Existing Installations

XP users may use the built-in wireless
®
7