Statically Assign An Ip Address - D-Link DWA-552 User Manual

Appendix B - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows XP - Click on Start > Control Panel > Network Connections.
®
Windows 000 - From the desktop, right-click My Network Places > Properties.
®
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on
your router.
Example: If the router´s LAN IP address is 19.168.0.1, make your IP address 19.168.0.X
where X is a number between  and 99. Make sure that the number you choose is not in
use on the network. Set Default Gateway the same as the LAN IP address of your router
(19.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (19.168.0.1). The Secondary
DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DWA-55 User Manual 47