Table of Contents
Advertisement
Section 4 - Wireless Security
Using the D-Link Wireless Connection Manager
It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining
an existing network, you will need to know the WEP key being used.
1. Open the Wireless Connection Manager by double-clicking on the
D-Link icon on your desktop. From the list of available wireless
networks, select the network you want to connect to and click Connect.
If the network is using WEP, the screen (as shown to the right) will
appear.
2. Enter the WEP key exactly as it is on your wireless router or access
point.
3. Click the Show text in the password field box to see the WEP key. Unchecking it will hide the key.
4. Click OK to connect to the network. Allow up to 30 seconds to connect.
If you would like to create a new network and enter the WEP settings, refer to the next page.
D-Link DWA-55 User Manual
Configure WEP
7
- Quick Links:
- D-Link Wireless Connection Manager
Hide quick links:
Advertisement
Table of Contents
