Lexmark 7000 User Manual page 2

6.2
Windows 3.1
To install the printer software:
1 Make sure the printer's power is on.
2
Start Windows.
3 Insert Setup Disk 1 into drive X, where X
is the letter of your floppy drive.
4 From the Windows Program Manager
menu bar, choose File, and then choose
Run.
5
In the Command Line: text box, type
X:setup, and then click OK.
6
When prompted by the printer software,
insert Setup Disk 2 into drive X.
7 When prompted, continue with step 7,
"Install print cartridges."
6.1
Windows 95
To install the printer software:
If Windows 95 prompted you to install the
printer software, and you have already
installed it, continue with step 7, "Install
print cartridges."
1
Make sure the printer's power is on.
2
Start Windows.
3
Insert Setup Disk 1 into drive X, where X
is the letter of your floppy drive.
4
From the Start Menu choose Settings,
and then choose Printers.
5 From the Printers folder double-click
Add Printer.
6 Follow the instructions on the screen
• When you are prompted to select the
printer's manufacturer and model,
click Have Disk.
• In the "Install From Disk" dialog box,
type X, and click OK.
7 When prompted by the printer software,
insert Setup Disk 2 into drive X.
8 When prompted by the printer software,
continue with step 7, "Install print
cartridges."
7
Install
print cartridges
1
Open the printer front cover.
2
Remove tape from both cartridges. Do
not touch copper area!
3
Insert both cartridges.
4
Push back on the cartridges until they
snap into place.
Black Color
cartridge cartridge
in carrier carrier
5 When prompted by the printer software,
make sure you align the print cartridges.
6
When installation is complete, remove
the Setup diskette.
• This product is designed, tested, and approved to meet strict global
safety standards with the use of specific Lexmark components. The
safety features of some parts may not always be obvious. Lexmark is
not responsible for the use of other replacement parts.
8
If you need to repack the printer in its
original box, you must remove the paper
Open Online Guide
exit tray.
Your user's guide information is now
online to give you easier access to
information such as how to:
• use printer software
• load paper
Press down
• use manual feeder
firmly here
• change print cartridges
• change printer settings
• print from Windows applications
• print from DOS applications
To remove the paper exit tray:
• reset printer defaults
1
• order supplies
2
• solve problems
You can also find information about:
• who to call if you need help 3
Within the Online Guide, you will find
underlined words or "hot text." Click the
4
hot text to instantly view more
information on a related topic.
Store the setup sheet
Windows 3.1 or
Windows for Workgroups
Store this Setup sheet in the bookholder
behind the printer's paper load door.
From the Lexmark 7000 Color Jetprinter
program group, double-click the Online
Guide icon:
Windows 95
1 From the Start menu, click Programs.
2 Click Lexmark 7000 Color Jetprinter.
3 Click Online Guide.
Lexmark, Color Jetprinter, and ColorFine are trademarks of Lexmark International, Inc.,
registered in the United States and/or other countries.
Windows is a registered trademark of Microsoft in the U.S. and other countries.
Other trademarks are the property of their respective owners.
©1996 Lexmark International, Inc. Lexington, KY 40511-1876 USA
Removing the
paper exit tray
Place the printer near the table edge.
Pull the paper exit tray as far out of the
printer as possible. The tray should
extend beyond the table edge.
Press down firmly in the center of the
tray at the point where the tray enters the
printer.
Pull the paper exit tray all the way out of
the printer.