Technical Specifications - TRENDnet TPE-224WS User Manual

TRENDnet User's Guide

Technical Specifications

Standards
• IEEE 802.1d
• IEEE 802.1p
•
IEEE 802.1Q
•
IEEE 802.1s
•
IEEE 802.1w
• IEEE 802.1X
• IEEE 802.1ab
• IEEE 802.3
•
IEEE 802.3u
•
IEEE 802.3x
•
IEEE 802.3z
• IEEE 802.3ab
• IEEE 802.3ad
• IEEE 802.3af (15.4 Watts/port)
•
IEEE 802.3at (30 Watts/port)
•
IEEE 802.3az
Device Interface
• 24 x 10/100 Mbps PoE ports (ports 1-4 PoE+, ports 5-24 PoE)
• 4 x Gigabit ports (ports 25-28)
• 2 x Shared SFP slots (shared with ports 25-26)
•
LED indicators
•
LED Display Mode Button (Toggles LED indicators to display Link/Activity or PoE
only port status)
•
Reset Button
Data Transfer Rate
• Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
• Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
© Copyright 2014 TRENDnet. All Rights Reserved.
•
Gigabit Ethernet: 2000 Mbps (full duplex)
Performance
• Switch fabric: 12.8 Gbps
•
Ram buffer: 0.5 MB MAC Address Table: 8 K entries
•
HOL Blocking Prevention
•
Forwarding rates: 9.5 Mpps (64-byte packet size)
Management
• HTTP/HTTPS (SSL v2/3 TLS) Web based GUI
• SNMP v1, v2c, v3
•
RMON v1
•
Static Unicast MAC Address
•
Enable/disable 802.3az Power Saving
• LLDP
• Virtual Cable Test
• IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration
MIB
•
MIB II RFC 1213
•
Bridge MIB RFC 1493
• Bridge MIB Extension RFC 2674
• SNMPv2 MIB RFC 1907
• Ethernet Interface MIB RFC 1643
•
Ethernet –like MIB RFC 2863
•
Interface Group MIB RFC 2233
•
MIB Traps Convention RFC 1215
• RMON MIB RFC 1757, RFC 2819
• 802.1p MIB RFC 2674
• RADIUS Client Authentication MIB RFC 2618
•
LLDP-MIB IEEE 802.1ab
•
Ping MIB RFC 2925, RFC 4560
TPE-224WS
93