Table of Contents
Advertisement
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the handset
without disconnecting the call. The next call rings normally at the preset volume.
•
Press OFF, MUTE or
displays briefly.
•
Press
/VOL on the telephone base.
Press MUTE on the headset.
•
Find handset
Use this feature to find all system handsets and headset.
To start paging:
•
Press FIND HANDSET on the telephone base. All idle handsets ring and
display ** Paging **. The headset rings and blinks in blue.
To end paging:
Press FIND HANDSET again on the telephone base.
•
/HOME,
•
Press
•
Place the handset in the telephone base or charger.
•
Press
on the headset.
Do not press and hold FIND HANDSET for more than four seconds. It may lead
to deregistration.
Redial list
Each handset stores the last 0 telephone numbers dialed.
To review and dial a number from the redial list:
Press REDIAL when the phone is not in use.
.
or or REDIAL repeatedly until the desired entry displays.
.
Press
,
/HOME,
3.
Press
To delete a redial entry:
When the desired redial entry displays, press DELETE.
Join a call in progress
You can use up to four system handsets at a time. You can buy additional expansion
handsets (DS6071) for this telephone base. You can register up to twelve devices to
the telephone base, including a maximum of two cordless headsets.
•
When a handset is on a call, press
on another handset to join the call. Press OFF to exit the call. The call continues
until all devices hang up.
•
Press
on the headset to join the call. Press
continues until all devices hang up.
Push-to-talk (PTT)
You can directly broadcast messages from one handset to the speakerphone of
one or multiple handsets.
To start a PTT communication:
Press PUSH TO TALK when the phone is not in use.
.
Scroll to a desired handset or or Group >> Press SELECT.
.
•
Only one handset can talk at a time.
Press and hold PUSH TO TALK while you are talking.
•
Release PUSH TO TALK to let the other party respond.
Intercom
Use the intercom feature for conversations between two handsets.
Press MENU on your handset when not in use.
.
Scroll to Intercom >> Press SELECT >> Scroll to the destination handset
.
number >> Press SELECT.
3.
To answer the intercom call, press
dialing keys on the destination handset.
To end the intercom call, press OFF or place the handset back in the telephone
4.
base or charger.
Answer an incoming call during an intercom call
If you receive an incoming call during an intercom call, there is an alert tone.
•
To answer a home call, press
To end the intercom call without answering the outside call, press OFF. The
•
intercom call ends and the telephone continues to ring.
•
To answer a cell call, press
automatically.
on the handset.
, CANCEL or any dialing key on the handset.
CELL 1 or
CELL 2 to dial.
/HOME. The intercom call ends automatically.
CELL 1/
displays and Ringer muted
/HOME or the corresponding
again to exit the call. The call
/HOME,
CELL 1/
CELL 2. The intercom call ends
he intercom call ends
CELL key
The call
CELL 2,
or any
Hide quick links:
Advertisement
Table of Contents
