System Setup Using Sonos Controller 100 - Sonos ZonePlayer 120 User Manual

C-12
"If you are connecting a ZonePlayer 120" on page 2-8) and then apply power.
• If you are adding a ZonePlayer 90, connect to an external amplified device (see
"Using Line-out" on page 2-24) and then apply power.
• If you are connecting a ZoneBridge, simply apply power.
From the Music Menu, touch Settings>Add a Zone.
2.
Follow the prompts to add more Sonos components to your music system
3.
Step 4: Play some music!
From the Music Menu, choose one of the following options:
1.
• To play music stored on your NAS drive, touch Music Library.
• To activate a free music service trial, touch More Music. (Your music system
must be registered to activate a trial, so if you have not yet registered, you can
do it now by selecting Settings>Advanced Settings>System Registration.)
• To add a Sonos-compatible music service you already subscribe to, select Set-
tings>More Music, and then touch I already have an account. You will be
prompted to enter your music service user name and password.
To play an Internet radio station, radio show, or podcast, touch Radio.
System Setup Using Sonos Controller
100
Note: If you have just purchased a new Sonos Controller CR100, you should
charge the battery. Connect your Sonos Controller to the power adapter using
the adapter cable. You can use your Controller while it is charging.
Step 1: Connect a Sonos component to your router
Connect one ZonePlayer or ZoneBridge to your router using a standard Ethernet
cable (included), and then apply power.
• If you have structured (built-in) wiring that connects to a router located
elsewhere in your home, you can connect the Ethernet cable from a live wall
plate into one of the Ethernet switch connectors on the back of your Sonos
Sonos Multi-Room Music System User Guide