Equalization (Sound Settings) - Sonos ZonePlayer 120 User Manual

Chapter 2: System Setup
When a ZonePlayer is in Sonos Extender mode, it does not display in your Zones
menu. When you change it back to normal operation using the ZonePlayer Settings
screen, it will appear as an unnamed zone and you can rename it at that time.

Equalization (Sound Settings)

You can change the sound settings (treble, bass, loudness, or balance) for each
individual ZonePlayer.
The loudness setting compensates for normal changes in the ear's sensitivity at low
volumes; you can turn this setting on for a ZonePlayer if the sound seems thin to you
at low volumes.
Using the Sonos Controller for Mac or PC
Highlight a zone in the Zones pane, and then click the Equalizer button to change
the sound settings (treble, bass, loudness, balance or volume) for an individual
ZonePlayer. (You can also select Equalizer from the Play menu.)
• To change the volume for a zone group, use the group volume control on the
left.
• If you have two or more zones in a group, use the Equalizer window to adjust
the volume for each zone individually.
2-21