Add A Zoneplayer - Sonos ZonePlayer 120 User Manual

2-14
• If you are using the ZoneBridge to extend the wireless network in your house,
locate the ZoneBridge wherever you want additional wireless coverage. If
desired, you can also move any existing ZonePlayer(s) to other locations.
A Sonos ZoneBridge will not display in your Zones menu after it is set up. If you
wish to change the settings for this device, you can choose one of the following
options:
• Using the Sonos Controller for Mac or PC, select Zones>ZoneBridge Settings.
Highlight the ZoneBridge, and then click Settings.
• Using a handheld Sonos Controller, select Settings>ZoneBridge Settings
from the Music Menu.

Add a ZonePlayer

If your house has structured (built-in) wiring, you can make a 'wired' connection to
the new Sonos component. Otherwise, you can connect wirelessly.
Caution: Do not place any items on top of your ZonePlayer. This may
impede the air flow and cause your ZonePlayer to overheat.
Place the ZonePlayer in the room you have selected, and apply power.
1.
If you are making a wired connection, connect a standard Ethernet cable from
2.
either your router, another ZonePlayer, or a 'live' network wall plate to any of the
Ethernet switch connections on the back of the new ZonePlayer. If you are
making a wireless connection skip this step and proceed to step 3.
Choose one of the following options:
3.
• If you are adding an amplified ZonePlayer, attach desired speakers (see "If you
are connecting a ZonePlayer 120" on page 2-8 if you need help with this step).
• If you are adding an unamplified ZonePlayer, connect an external amplifier (see
"If you are connecting a ZonePlayer 90" on page 2-9 if you need help with this
step).
Choose one of the following options:
4.
• Using the Sonos Controller for Mac or PC, select Add a ZonePlayer or Zone-
Bridge from the Zones menu.
Or,
Sonos Multi-Room Music System User Guide