Matching Connector/Cable; Signal Inputs/Outputs - Sony PFV-SP3300 Installation Manual

1-7. Matching Connector/Cable

1-8. Signal Inputs/Outputs

1-7. Matching Connector/Cable
When external cables are connected to the connectors on the PFV-SP3300 rear panel, the hardware listed
below (or the equivalent) must be used.
PFV-SP3300 side connector
Print on Connector type
REMOTE BNC, 75Z
REF IN A/B
STATUS OUT D-sub Mini 15-pin, Female
1-8. Signal Inputs/Outputs
The input and output signals of the connector on the rear panel are as shown here:
STATUS OUT (D-sub Mini 15-pin, female)
5
10
15
< External view >
Pin No. I/O Signal
1 O PS-A ERROR OUT
2 O PS-B ERROR OUT
3 O FAN ERROR OUT
4 O BOARD ERROR OUT
5 O BOARD WARNING OUT Warning status output of
6 to 13 I/O GPIN/OUT 1 to 8
14, 15 – GND
1-8 (E)
Matching connector/cable
Connector type
BNC, 75Z
Belden 1694 coaxial cable
D-sub Mini 15-pin, Male
1
6
11
Function
State of power unit A
Normal: Low level
State of power unit B
Normal: Low level
State of frame ventilation fan
Normal: Low level
Error status output of
optional board
Normal: Low level
optional board
Normal: Low level
GPI, Not used
Sony Part Number
1-569-370-12
–
–
Description
The output of power unit A is abnormal.
The fan of power unit A stops.
The output of power unit B is abnormal.
The fan of power unit B stops.
The frame ventilation fan stops.
Error output from optional board
Overpower consumption from optional
board
Warning output from optional board
PFV-SP3300