Sony PFV-SP3300 Installation Manual page 9

Installing Connector Panel (Rear side)
The connector panel must be installed to the slot which
contains the main board.
1. Remove the two screws and remove the blank panel of
the slot which contains the main board.
n
Keep the removed blank panel and two screws.
B 3x5
B 3x5
Blank panel
2. Connect the connector panel to the MB-915 board.
3. Secure the connector panel with the two screws.
MB-915 board
Screws
Connector panel
n
Do not open the slot for an air-cooled effect of this unit.
Attach the blank panel to an empty slot.
PFV-SP3300
1-5. Installing Optional Board
1-5 (E)